1968-73 Nova Seat Belts - 3 Point - Bench Seat - Starburst Buckle
Price:
$389.95
Special Order Notice:
Once your order is approved, please allow up to two weeks in production before your order ships.
$10.00 Flat Rate Shipping:
All standard $7.00 Flat Rate orders ship via USPS (Priority Mail Flat Rate Boxes) or FedEx Ground. All Next Day, 2nd Day, or 3 Day shipping orders must be called in. If you have any special shipping requirements please give us a call, we may be able to accommodate your order. Any special order or custom made belts will not ship until they are completed.If you provide a valid e-mail address (that is not blocked or filtered) at checkout, you will be notified when your order has shipped.
Click for full shipping details.
Seat Belt Safety Regulations:
Check the tag on your seat belts, its information worth knowing. Our seat belts are SAE #J386, FMVSS #209, and FMVSS #302 compliant. They are tested in the United States of America to all ensure all of our seat belts are up to specs. You are NOT buying an inferior foreign made or tested seat belt.The fact is that manufacturers overseas really don't understand the FMVSS requirements like manufacturers in the USA do. For example, some of the belts that are sold from China say "DOT Approved." The Department of Transportation (DOT) regulates tire manufacturing, not seat belts.
Product Warranty:
All seat belts are non-refundable once installed. You may examine and mock-up seat belts, but once they are bolted in they are yours to keep. We can not re-sell used safety equipment.You are buying the finest aftermarket seat belts when you shop at Seatbeltsplus.com. We are proud to stand behind our products. Seatbeltsplus.com offers a one year warranty on every seat belt against defects in materials and workmanship under normal use and service. Warranty is non-transferable and valid for original retail purchaser only. The obligations of Seatbeltsplus.com under this warranty are limited, and shall not exceed the cost of non-conforming products. The foregoing Warranty and Conditions shall apply to any repair, reworked or replaced product, part or component supplied by Seatbeltsplus.com. Further, Seatbeltsplus.com shall not be liable for any incident or consequential damages, or loss of use, or other commercial loss, however occasioned. Items not covered include, but are not limited to chrome plated items/products, installation defects, abuse, misuse, normal wear and tear, natural degradation of cloth fibers due to UV exposure, improper installation and labor for removal and/or installation. This warranty is exclusive and in lieu of all other warranties expressed or implied, including any implied warranty of merchant-ability of fitness.
Quality Aftermarket Seat Belts:
What is the difference between seat belts made in China versus our seat belts? One of the main reasons that Chinese products are so appealing is the price, but when you buy from Seatbeltsplus.com there is no price difference. Chinese manufactured seat belts do not meet FMVSS 209/302. Sometimes the colors and thread don't even match. The fact is oversea manufacturers really don't understand the FMVSS requirements like USA manufacturers do. For example, some foreign made belts state "DOT Approved." The Department of Transportation (DOT) regulates tire manufacturing, not seat belts. Foreign belts are tested to foreign standards, not American Standards.We offer the lowest prices on Seat Belts made in the USA**. Don't settle for cheap seat belts when buckling in yourself or your loved ones. Our seat belts are proudly assembled, sewn and finished in Jupiter Florida, United States of America. You can rest assured knowing all our aftermarket seat belts are continually tested and adhere to strict federal safety regulations and standards.
**Made in Florida United States of America
(with domestic & foreign components).
7 Panel Swatches:
Description
1968-1973 Chevy Nova 3-Point Conversion Seat Belts are now
made available here at SeatBeltsPlus. We recommend converting to 3-point retractable seatbelts
increase the safety of your seat belts. Includes our "Starburst"
metal push button and only fits bench seats.
Product Availability:
- All colors are considered special order.
- Special order items ship within 2 weeks unless in stock.
- In stock items ship within 1 business day.
Product Specs:
Shipping Policy
We offer $10.00 Standard Shipping via USPS Priority Mail or FedEx Ground. Most orders will arrive in 2-5 business days. However, depending on stock levels, some orders may take up to 10 business days for delivery. Expedited shipping may be available on some items, please call us for more information at 800-445-2847.You will be notified via e-mail when your order has shipped with tracking information if it is available.
Most items that we sell are in stock and ship from our warehouse every business day. Orders received before 2 pm PST typically ship the same business day unless the item is a Special Order item. Orders received after 2 pm typically ship the next business day.
Please note, expedited shipping does not decrease time needed for production on Special Order items. Special Order items will be shipped after the specified production time.
NOTE: $10.00 shipping only valid for orders shipping within the lower 48 states. Alaska, Hawaii, US Territories and Military Bases will be charged $16.00 for shipping. We do not ship outside of the USA.
Return Policy
Before returning any item, you must call us at 1-800-445-2847 or 1-760-477-8521 for a return authorization. All returned items must be in new, non-installed condition. We accept returns within 90 days of purchase. After 90 days, we cannot accept returns or exchanges.We do not accept returns on seat belts that have been installed. These are safety items. Once they have been installed they cannot be resold. There are no exceptions to this policy. Any bolt markings on the seat belt ends will be considered an installed belt and will not be accepted as a return.
You may take seat belts out of the package to inspect them. We recommend holding them up to existing belts to compare. If you have any concerns whether our belts will fit your vehicle please take all proper measurements and compare them with our seat belts before installing.
All returns are subject to a 10% restocking fee. Special order items are subject to a 50% restocking fee. We ask that you please return items in their original packaging, with a copy of the original invoice.
Shipping charges are non-refundable. Customers are also responsible for return shipping charges.
There are no returns accepted on custom orders, seat belt webbing, or closeout items.
What Seat Belts Will Fit My Car? Check Before Ordering!
Our universal seat belts are designed to be generic in order to cover as many applications as possible. There is no list or reference that matches our aftermarket Seat Belts with your factory application. We can tell you how to measure and examine your existing seat belt to find the best replacement available based on length and buckle style.
This is an aftermarket/universal seat belt and is not meant to work with OEM factory components or sensors. Seat belts must be replaced as a complete unit. Do NOT mix and match our tongues/buckles with original equipment components, they will not match up correctly. Always check if our belts will be long enough to fit your application prior to ordering.
How to Measure for a 3 Point Retractable Lap & Shoulder Seat Belt
Our 3 Point Retractable lap & shoulder seat belts vary in lengths depending on buckle style so be sure to pre-measure if our seat belt will fit your application. The length you need will be determined by a number of factors including the location of mounting points, position of seat, style of seat, and intended user.
- To measure for a 3 Point Retractable Lap & Shoulder Seat Belt, first extend your current seat belt to a comfortable length and position. If your car currently does not have seat belts you can substitute a piece of rope where a seat belt would normally mount and use it as a reference for measurements.
- You will want to measure for 2 lengths: Length of (A) buckle side, and length of (B1 + B2 + B3) retractable lap & shoulder side.
- Check if our seat belt buckle/sleeve side will be long enough to be accessible at the sides of your seat. For example, if your current seat belt buckle sits 18 inches from the floor then seat belt with a 12 inch plastic sleeve will not be long enough for your application without an extender bracket.
- To get a measurement for retractable lap & shoulder side start at the bottom mounting bolt. Measure from (B1) floor mount to shoulder top mount, diagonally down (B2) across your chest to seat belt buckle, and (B3) back across your lap down to retractor mounting location. Make sure this combined length does not exceed the total length of our retractable seat belts.
- Check seat belt webbing will not rub against any interior components or seat frame.
Mounting a 3 Point Retractor Housing
Our retractable seat belts use inertia locking retractors. Whenever there is a sudden tug on the webbing, the inertia clutch inside the housing spins out and locks the webbing reel from releasing any more webbing. Inertia locking retractors allow the user to move freely while wearing the seatbelt until the retractor senses a sharp pull.
- Inertia locking retractors are aftermarket products and work independently of any brake systems and O.E. wiring sensors.
- This seat belt's retractor mechanism must be mounted vertically in order for inertia locking centrifuge to function properly. Retractor must mount either on floor (mount upright with an "L" Bracket) or can be mounted on door pillar if mount already exist.
- Do not mount retractor diagonally or horizontally. A tilting retractor will not function properly and can result in serious injury or death.
- Do not mount retractor on ceiling, body quarter panels, inside seats, attached behind seat, or feeding through seats.